Made the USA. Patent Pending #17194507. Flame Rated UL94 V-0
Nuisance Current Blocker (NCB™)
The world's only device that stops nuisance current on grounding conductors while providing an effective ground-fault path to trip a breaker. Solves the problem of "foreign" uncontrolled current that no breaker can turn off. Any "solution" must reduce contact current below 2µA to be considered healthy.
Interviews and NCB info
3/3/21 Interview
3/3/21 Interview
3/3/21 Interview
Watch here. Mitch Webb 3/3/21 Interview with Andrew. Sneak peak of 5G course material, home EMFs, electrical grid problems, EPRI contact current info, Health standard vs. Fire, NCB solutions, and more.
NCB Strategy
3/3/21 Interview
3/3/21 Interview
Watch here. I explain my reason for making my Patent Pending NCB information open to the public.
NCB Quick Look
3/3/21 Interview
NCB Removing Noise from Gas Pipe
Watch here. Showing current and frequency reduction after installing NCB on a line from a yard ground rod.
NCB Removing Noise from Gas Pipe
E-Field Increased with Grounding
NCB Removing Noise from Gas Pipe
Watch here. With 30 mA of current on the gas pipe and grounding system, a few dielectric unions and the NCB are important tools.
E-Field Increased with Grounding
E-Field Increased with Grounding
E-Field Increased with Grounding
Watch here. Important to check the integrity of the Service Neutral.
Service Neutral Problem
E-Field Increased with Grounding
E-Field Increased with Grounding
Watch here. Important to check the integrity of the Service Neutral.
E-Field Reduced
Stetzer Cow Research
E-Field Reduced
Watch here. Best to ground objects, not humans, to remove the electric field.
CAT 7 Current
Stetzer Cow Research
E-Field Reduced
Watch here. Ethernet grounding, computer laptop contact current, etc.
Stetzer Cow Research
Stetzer Cow Research
Stetzer Cow Research
Watch here. Showing the need for a new health standard to remove current and frequencies from grounding systems.
FAQ
Frequently Asked Questions
Q: What is the cost of the device?
A: Right now, $250-350 for either the plug-in version or the wired version.
Q: Will the NCB help reduce the current on grounding conductors?
A: Yes. That is exactly its purpose. And that will reduce magnetic fields as well.
Q: Would the free negative polarity DC electrons from the earth be able to flow in to charge up your cells when sleeping on an earth mat?
A: No. The NCB intentionally blocks all current, AC and DC, including DC current flowing through the earth intentionally put on gas pipes (cathodic protection) by the gas company. I suggest getting your earth therapy by walking on earth to discharge built up excessive electrical capacitance/body voltage, not by plugging into any electrical wiring. Electrical systems are very unhealthy. See the Current Flows document and video and Current Flow Whack-A-Mole PDF at the top of this page, NCB Tech Info.
Q: Can these units go directly between your ground rod and the panel to cover the whole house in a residential home situation?
A: No. Do not place the NCB on the grounding electrode conductor (GEC). You want a very good connection between the neutral and the earth to reduce the back pressure in the home grounding system. I am recommending oversizing the GEC to 1/0.
Q: You showed two units, how would I decide on which unit to buy for the earth mat?
A: The plug version will be the easiest one to use for an earthing mat. Just plug it into a grounded outlet and then plug your earthing mat into the NCB equipment grounding conductor hole. If you need a banana plug adapter, they are readily available.
Q: Will the NCB sit on the floor near the outlet that is going to be used, then use a cable adapter to go from the NCB to the outlet ground, then use the plug on the earth mat to go into the other side of the NCB?
A: The plug version goes into the wall outlet. Or, you could use the wired version and have it affixed to any surface or simply set on the floor. If you need a banana jack adapter or one with aligator clips to fit various applications see the Static Care ESD Grounding Cable with Alligator Clip.
Q: A Building Biologist placed an clamp meter around the ground spike that I have my YShielded walls attached to. It showed current at that point. I was taking a look at the NCB and was wondering if that would help with this problem?
A: Yes. It can stop the current (primary return or secondary fault current) circulating to/from the grounded YShield paint. Be sure to turn off the power around the paint.
